background image

Operating Instructions

Safety Instructions

Consumer Support

Tr

oubleshooting T

ips

8

About washer features.

PerfecTemp

PerfecTemp 

(on some models)

PerfecTemp

senses the incoming water temperature and adjusts the fill water to obtain a more

precise temperature range for all three wash temperatures. 

You may select cold, warm or hot.

For example, in a Cold Wash selection, some warm water may be added to reach a
temperature needed to better dissolve detergents. 

Often, detergents are not completely

dissolved in very cold water, especially in cooler climates.

NOTE: PerfecTemp 

will not adjust the fill on 

WARM WASH

unless the washer lid is closed.

Be sure to start the washer after the lid is closed.

Autosoak Option 

(on some models)

This option begins with a brief agitation, soaks for a specified period of time, then moves
through the rest of the cycle automatically. On some models, this option is located on the
Cycle Selector knob.

2nd Rinse Option 

(on some models)

When you use extra detergent or bleach to clean heavily soiled clothes, you may want to
use the 2nd Rinse option. It provides a second deep cold rinse.

Extended Spin Option 

(on some models)

Use this option to extract more water from your clothes. Clothes will be drier when this
option is selected, and will dry more quickly in your dryer.

SPOT SPRAY

Spot Spray 

(on some models)

Provides a short spray of water to allow you to dampen clothing when you pretreat stains. 

Open the washer lid.

Press the 

SPOT SPRAY

button. (You will see a short stream of water.)

Dampen your soiled garment with the 

SPOT SPRAY 

option and rub your favorite

pretreatment product into soiled area.

NOTE: 

The 

SPOT SPRAY

option will not work if:

■ 

the washer lid is down.

■ 

the washer basket is filling.

■ 

the water has already reached the level you selected.

3

2

1

(Appearance and features may vary)

Summary of Contents for EWA4500

















Reviews: