GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1
V
IVID
I
N
AND
V
IVID
Q
N S
ERVICE
M
ANUAL
7-168
Section 7-8 - Automatic Error Log
7-8-2-1
Formatting a DVD/CD
Prior to exporting logs or any data onto a DVD/CD, the media must be formatted, as described below.
To Format a DVD/CD:
1.) Connect the DVD/CD-RW media drive to the USB port and make sure the DVD/CD-RW power
switch on the rear of the drive is set in the
External
position, as shown in
, below.
2.) Insert the blank DVD/CD media into the DVD/CD-RW drive tray.
3.) On the Vivid
i
n/ Vivid q N system, press the
<Config>
key.
4.) Select the
Connectivity
Tab and activate the
Tools
Tab.
5.) Under
Removable Media
, select the media type
CD/DVD Writeable
from the Media drop-down
menu, as shown in
.
6.) Click the
Format
button.
Figure 7-145 Power Switch in External Position
NOTICE
IMPORTANT:
Use only CD-R, DVD-R or DVD+R media from a reputable vendor and only
high-grade media types.
Figure 7-146 Connectivity - Tools - Removable Media
External
Power OFF
Internal
Summary of Contents for FL000090
Page 2: ......
Page 30: ...GE HEALTHCARE DIRECTION FQ091013 REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL xxviii ...
Page 739: ......
