Settings
Individual settings for agitation (
Soil
), water temperature (
Temp
), and spin (
Spin
) can be set from the minimum (lowest in column) to
maximum (highest in column). In general, the higher up the column, the more washer energy will be used.
NOTE:
Higher
Spin
speeds typically reduce dryer time/energy usage (i.e. reduces total energy when using both a washer and a dryer).
GEAppliances.com
Wash Cycles-Cycle Selector Knob
The wash cycle controls the type of washing process. The Cycle Selector knob can be turned in either direction. Turning the knob after
starting a cycle will stop the washer and change the cycle/options to the new selection. Press
Start
to begin the new cycle selection.
NOTE:
When the knob is turned to another cycle, the basket light is turned on to assist in loading.
The chart below will help you match the wash cycle setting with your clothing.
Speedwash
For small loads of lightly soiled items that are needed in a hurry. Provides light wash/rinse and short high speed spin.
Delicates
For lingerie and special-care fabrics with light to normal soil. Provides light wash and low speed spin.
Heavy Duty
An above normal cycle for heavily soiled or stained clothes. A soak cycle is added and the agitate cycle is extended
for extra cleaning. This more aggressive cycle should be used sparingly.
Jeans
For washing medium to lightly soiled jeans. Provides normal wash and medium speed spin. (For heavily
soiled work jeans, use
Whites
cycle.)
Dark Colors
For non-colorfast cottons and blends or items that are labeled cold wash. Provides normal wash and medium speed
spin.
Whites
For heavy to lightly soiled whites, household linens, work and play clothes. Provides a heavy wash and a high
speed
spin.
Normal/
Light Colors
For heavy to lightly soiled colorfast cottons, household linens, work and play clothes. This cycle provides the best
overall cleaning and should be used for most everyday items. Provides normal wash and medium speed spin.
Towels/Sheets
Provides periods of agitation and soak tailored for washing towels and sheets. Provides normal wash
and a
high speed spin.
Sanitize
With Oxi
When combined with detergent and an Oxi laundry additive, performs a concentrated prewash sanitization step,
followed by a hot wash step, which is designed to remove 99.9% of bacteria found in home laundry.
Measure the detergent and Oxi product carefully. For average size loads, use the recommended amounts appropriate
for a large heavily soiled load, following the detergent and Oxi product label instructions. When sanitizing large or
extra large loads, use the maximum recommended dosage of Oxi product. Using more than one full scoop is not
recommended. Place the detergent and Oxi product directly in the bottom of the wash basket, before adding the
clothes. The washer hot water supply connection must provide a minimum of 120°F to ensure the effectiveness of
this
cycle.
NOTE:
The default
Sanitize With Oxi
cycle water temperature (Hot) can NOT be changed.
The
Sanitize With Oxi
cycle is certified by NSF International, an independent third party testing and certification
organization. The certification verified that the cycle reduced 99.9% of bacteria typically found in residential laundry
and that no significant contamination is transferred to subsequent washer loads. Only the
Sanitize With Oxi
cycle
has been designed to meet the requirements of NSF Protocol P172 for sanitizing effectiveness.
Bulky
Items/
For large coats, bed spreads, mattress covers, sleeping bags and similar large and bulky items. Large items
Comforters, Pillows
such as blankets, comforters, jackets and small rugs. Provides a normal wash and an extra heavy spin.
Quick
Rinse
Rinses and spins non-soiled items where a rinse only is desired. Provides an extra light wash and an
extra high speed spin.
Fabric Softener
and
Extra Rinse
options are available with this cycle.
Drain & Spin
For draining the basket and spinning water out of the clothes.
Basket Clean
Use for cleaning the basket of residue and odor.
Recommended use of at least once per month.
NOTE:
Never load laundry while using
Basket Clean
. The laundry may become damaged or contaminated.
See
the
Care and Cleaning
section.
Stain Removal Guide
The stain Removal Guide feature allows you to indicate what stains are on the garments in your load. This feature can be used with
any wash cycle except Sanitize.
To use Stain Removal Guide:
1.
Select the wash cycle.
2.
Press the
Stain Removal Guide
button (the button will light up when it is on). Continue to press to select
Tomato
stain,
Wine
stain,
Grass
stain or
Dirt
stain. The indicator light will show the selected stain.
To select a different stain, press the
Stain Removal Guide
button until desired stain to be removed is lit.
To turn off
Stain Removal Guide
, press until the light on the button turns off.
NOTE:
The Soil and Temperature levels will be changed to match each stain type. Turning off
Stain Removal Guide
will return the
settings to default.
D
5
E
NSF Protocol P172
Sanitization Performance of Residential and
Commercial, Family-Sized Clothes Washers
Summary of Contents for G018
Page 26: ...10 Notes ...
Page 42: ...10 Notas ...