2
Installation Preparation
PARTS SUPPLIED:
Two #8 Phillips flat head wood screws, 5/8”long
to secure dishwasher to underside of countertop
(in literature package).
2 Wood Screws
MATERIALS YOU WILL NEED:
Ferrule, compression nut and 90° Elbow (3/8”NPT
external thread on one end, opposite end sized to
fit water supply)
Thread seal tape
UL Listed wire nuts (3)
90° Elbow,
Ferrule and
Compression Nut
Hand
Shut-Off
Valve
Thread
Seal Tape
Wire Nuts (3)
Materials For New Installations Only:
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection.
Hand shut-off valve
Water line 3/8”min. copper
Coupler for extending drain line, if applicable
Waste Tee
Electrical Cable
(or Power Cord, if applicable)
Hot Water line
Air Gap
Screw Type
Hose Clamps
Strain Relief
Coupler
TOOLS YOU WILL NEED:
Phillips head screwdriver
5/16”and 1/4”nutdriver
6” Adjustable wrench
Level
Carpenters square
Measuring tape
Safety glasses
Flashlight
Bucket to catch water when flushing the line
Gloves
For New Installations Only:
Tubing cutter
Drill and appropriate bits
Hole saw set
Screw Driver II
Nutdriver
Crescent Wrench
Level 2
Carpenters Square
Measuring Tape
Safety Glasses
Flashlight
Tubing Cutter
Drill & Bits
Hole Saw Bit
Phillips head
screwdriver
5/16”and
1/4”nutdriver
6” Adjustable
wrench
Level
Carpenters
square
Measuring tape
Safety glasses Flashlight
Bucket
Gloves
Tubing cutter
Drill and Bits
Hole saw set
