6
Write your codes down here for easy reference
later.
Direct Code Entry
1. Press and hold the
SETUP
button until
the red indicator stays on, then release
the
SETUP
button.
2. Press and release the desired device
button (
TV
,
DVR
, etc.). The red indicator
blinks, then stays lit.
3. Enter the 4-digit code
from the code tables
(on separate sheet).
Note: after a valid
code entry, the red
indicator turns off. For
an invalid code, the
red indicator flashes.
4. With your device on, press
ON/OFF
.
If the device turns off, no further
programming is required. Note: If
some buttons do not operate your
equipment, try one of the other
codes for your brand.
Device
Device stored Code
TV
TV
CBL/SAT
DVD/DVR
Summary of Contents for GE universal remote
Page 1: ...Universal Remote Instruction Manual 24912 ...
Page 14: ...Notes 14 ...
