21
20
7a)
7b)
NOTE
-
If you do not change any settings during Meter Set-up for over 2 minutes, the GE006 Blood
Glucose Meter will leave setting mode and power off automatically.
7. Volume Setting
With the volume blinking, press the Left or Right button to
turn the volume on or off. Press the Main button to confirm
and finish the settings.
8. Setting the Unit of Measurement
With milligrams per deciliter (mg/dL) or millimoles per liter
(mmol/L) blinking, press the Left or Right button to switch.
Then press the Main button to confirm it and finish the
settings.
9. Ending setting
After measurement of unit setting, for confirmation you will
hear a beep (if volume is turned on). All the settings are saved
and completed and will return to time screen.
Setting Up Your Meter - Setting the Date, Time and Volume
1. How to turn on the GE006 Blood Glucose Meter
Press the Main button or
Insert a test strip.
2. Manual Power off
To power off the GE006 Blood Glucose Meter, press and hold the Main button for 4 seconds.
3. Auto Power off
The GE006 Blood Glucose Meter will power off automatically after 2 minutes if no buttons are pressed
or no strip is inserted.
Turning On / Off the Meter
8a)
8b)
9)
Summary of Contents for GE006
Page 1: ......
