23
22
Turning On/ Off the Bluetooth
1. Auto turn on the Bluetooth
After leaving the Setting mode, the Bluetooth will turn on automatically and the
" "
symbol blinks on the screen.
2. Turn off the Bluetooth
In Time mode, press and hold the Right or Left button for two seconds. The
blinking
" "
symbol will switch to the “ “ symbol with a beep (If Volume is
turned on).
3. Manual turn on the Bluetooth
In Time mode, press and hold the Right or Left button for two seconds. The
“ “ symbol will switch to the blinking “ “ symbol with a beep (If Volume is
turned on).
1)
2)
NOTE
1
.
The blinking
symbol should turn to steady immediately when
the Bluetooth connection is established.
2. Blinking back and forth “ “ symbol on the screen means the
meter is transferring data.
“ “
1
2
Handling the GE006 Blood Glucose Test Strip
How to handle the GE006 Blood Glucose Test Strip.
Inserting the GE006 Blood Glucose Test Strip:
1. Hold the GE006 Blood Glucose Test Strip between your thumb and middle
finger with the view window " " facing up.
2. Put your forefinger on the side of the strip as shown.
3. Insert the GE006 Blood Glucose Test Strip into test strip port until it clicks
and firmly stops.
1
2
3
Summary of Contents for GE006
Page 1: ......
