31
30
Performing a Blood Glucose Test
Performing a Blood Glucose Test
18
16
1
2
17
19
16. Pull off the depth adjustable cap. Without touching the
used disposable lancet, insert the lancet tip into the
protective lancet cover.
17. Hold the release button in one hand (see picture 17, step
1) and pull on the plunger with the other hand (see
picture 17, step 2) to safely eject the used disposable
lancet.
18. Discard the used disposable lancet into an appropriate
puncture-proof or biohazard container.
19. Replace the depth adjustable cap after finishing the test.
CAUTION
- Do not apply your blood drop to the sample port on the strip until you see the " " appear. The GE200
Blood Glucose Meter is performing an internal test and will display " " and " " if you apply blood too
soon. If this occurs, please repeat the test with a new test strip.
- Record the opening date of a new test strip vial. Discard the vial of test strips 4 months after opening.
- Always keep the metal contacts of the test strip port clean. If any dust or impurities are
present, please clean with a small, soft brush.
- The GE200 Blood Glucose Monitoring System and GE Lancing Device are intended for single
patient use only. Do not share these devices with anyone, including other family members.
- All parts of this kit are considered biohazards and can potentially transmit infectious diseases,
even after you have performed the cleaning and disinfecting procedure.
- Users should wash hands thoroughly with soap and water after handling the meter, lancing device, and test
strips.
- Please refer to the section "Cleaning and Disinfecting Procedures"on page 47 for cleaning and disinfecting
instructions.
Summary of Contents for GE200
Page 1: ......
