– 34 –
The ice box door comes as an assembly to
include the ice box door gasket, door latch, door
latch cover, and ice box door. The door must be
replaced as an assembly.
Ice Box Door Removal
1. Remove two T15 Torx-head screws securing
the top ice box door hinge to the door.
2.
Release the door latch and lift the door off the
lower ice box door hinge.
The ice bucket comes as an assembly to include
the crusher, fork, auger, and bucket. The bucket
must be replaced as an assembly. Turning the
auger in the bucket clockwise produces crushed
ice, turning the auger counterclockwise releases
cubed ice.
Ice Bucket Removal
1. Open the ice box door.
2. Lift up on the handle of the bucket and pull
the bucket out of the ice box.
The dispenser door has two ice box port gaskets.
The gaskets are used to seal the ice box inlet and
outlet air ports to the inlet and return air ports of
the cabinet when the dispenser door is closed.
Ice Box Port Gasket Removal
1.
Using a flat-blade screwdriver, pry the gasket
port away from the door.
2. Pull the gasket out of the gasket port.
Handle
Ice Box Door
Ice Box Port Gaskets
Ice Bucket
