– 51 –
The
XWF manifold is made up of the filter head
the filter locks into, water lines, and manifold
housing. The filter cover is not part of the
manifold. The water lines of the manifold connect
to the door water line and the outlet of the
isolation valve. The housing slides and clips into
the top of the cabinet.
Manifold Removal
1. Follow steps 1 through 7 of
MWFP Manifold
Removal
in this section of the service guide.
2. Push two locking tabs of the housing down
while pulling forward on the housing.
3. Continue pulling the housing forward to
remove the housing and water lines from the
cabinet.
4.
Remove the filter cover from the housing.
XWF Manifold
