GE GFXP1308FWW, Installation Instructions Manual

Installation Instructions

4   LEVEL THE WASHER OR DRYER

A

   Stand the washer or dryer upright. Move it 

close to its final location.

B

   Make sure that the washer or dryer is level by 

placing a level on top. Check side to side and 

front to back.

C

   Use an open 

ended wrench to 

adjust the legs in 

and out. Tighten 

the lock nut 

against the 

bottom of the 

pedestal.

NOTE:

 To minimize vibration, the locking nuts must 

be tight.

6   REMOVE SHIPPING SCREWS

Remove the 4 shipping screws on the back side of the 

washer.

5

 REINSTALL THE DRAWER

A

   Check to be sure the slides are closed.

B    Slide the drawer into the opening. Align the 

drawer supports to the slides on each side.

C    Reinstall the original screws into each drawer 

slide. Tighten both screws.

D    Open the drawer fully. Slide drawer divider 

into slots in the center of the drawer. The 

drawer should slide smoothly when you push 

it closed.

7

FINALIZE THE INSTALLATION

Refer to the washer or dryer Installation Instructions 

to complete the installation.

3