En
gli
sh
- 14 -
User manual
2. Menu HOLIDAY PROGRAM
2.1 Creating a HOLIDAY program
From the normal operating status:
➢
Press
“ ”
➢
Select PROGRAM with
“C1”
and
“C2”
and confirm with
“Ok”
➢
Select PROGRAM HOLIDAY with
with
“C1”
and
“C2”
and confirm with
“Ok”
➢
Select HOLIDAY NEW
and confirm with
“Ok”
➢
Choose the relay onto which
to carry out the
programming
➢
Select between HOLIDAY ONE DAY
(single day) or HOLIDAY PERIOD
(multiple contiguous days)
with
“C1”
and
“C2”
➢
Enter the date (holiday day) or
the holiday day interval (holiday
period).
Note: the first and last date are
to be considered included in the
holiday period
➢
Press
“Ok”
to confirm
Once the programming is confirmed,
the following message will appear
on the display
.
During normal operation, the possible
execution of a holiday programme is
signalled by the symbol in field (7) on
the display.
Note: recursive function
At this point, the instrument activates the
recursive function that makes is possible
to program multiple holiday days in series
(or
holiday
periods).
If you do not want to enter another
holiday
day (or period) press
“ ”
to end
programming.
The correlation of the programmed
holiday events is not controlled with the
recursive function: the function must
therefore be considered as facilitated
programming.
C1
C2
R
Ok
C1
C2
R
Ok
