7
Safety Instructions
Operating Instructions
Troubleshooting T
ips
Consumer Support
Installation Instructions
Preparing for Vacation
For long vacations or absences, remove food and unplug the
refrigerator. Move the control to the
OFF
position, and clean the
interior with a baking soda solution of one tablespoon (15 ml) of
baking soda to one quart (1 liter) of water. Leave the door open.
Preparing to Move
Secure all loose items such as shelves and ice trays by taping them
securely in place to prevent damage.
Be sure the refrigerator stays in an upright position during moving.
Defrosting
Defrost whenever frost on the wall of the ice tray compartment becomes
1/4
″
thick.
Never use a sharp or metallic instrument to remove frost as
it may damage the cooling coils.
(A punctured cooling coil will cause
serious problems and void the warranty.) We recommend using a plastic scraper.
Do not use any electrical device in defrosting your refrigerator.
To defrost,
remove foods and ice trays from the ice tray compartment.
Set the temperature control dial at
OFF
position. Defrosting usually
takes a few hours. To defrost faster, keep the door open. Also,
pouring warm (not hot) water on the frosted part may speed
defrosting.
Do not use boiling water—
it may damage plastic parts.
After defrosting,
empty water from the drip tray. Wash the drip tray
in warm water. Wipe the ice tray compartment with a damp cloth.
Then turn the temperature control to the desired setting and
return food and ice trays to the refrigerator.
NOTE:
If ice build up is very thick, it may keep the ice tray compartment door
from opening or closing completely. Don’t try to force it open; after defrosting,
the door will open and close easily.
Care and cleaning
of the refrigerator.
www.GEappliances.ca
