Before you begin – Read these instructions completely and carefully.
IMPORTANT: Save these instructions for local inspector’s use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.
NOTE TO INSTALLER: Be sure to leave these instructions with the Consumer.
NOTE TO CONSUMER: Keep these instructions with your Owner’s Manual for future reference.
CAUTION
To prevent electric shock, disconnect
electrical power supply to dishwasher
before changing panels. Do not operate
dishwasher while changing panel.
STEP 1 CUT 1/4" THICK CUSTOM PANEL TO SIZE
Tools and Materials Required:
• Stubby Phillips screwdriver
• Gloves to protect against sharp edges
• Safety glasses
The GPF825 trim kits provide for the installation
of a 1/4" thick custom door panel.
This kit includes:
Installation Instructions
GPF825
Series Kits
GPF825B, Black Trim Kit
GPF825C, Bisque Trim Kit
GPF825W, White Trim Kit
• Cut door panel to the dimensions shown in Figure 1.
NOTE:
The trim provided will conceal the cut edges of
the panel.
1/4" Thick
Door Panel
23-1/2"
25-1/16"
WARNING
Fully Assembled Door Panel Frame
2 Door Springs
To Be Used On All Models
Except PDW8500
On new installations, do not remove wood base until you
are ready to install the dishwasher. The dishwasher will
tip over when the door is opened.
Figure 1
Adjustable
Steel Panel
Top
Trim
Side Trim
Bottom
Trim
