GE GSD1230, Use & Care Manual

Operating Instructions

Dial Cycles 

(continued)

The RINSE & HOLD cycle is for rinsing 
partial loads which will be washed later. 
Do not use detergent.

a. Make sure ENERGY SAVER is selected.

b. Be sure the door is unlatched.

c. Slowly turn the Cycle Indicator Dial to 

RINSE & HOLD.

d. Latch the door to start the cycle.

The PLATE WARMER cycle is for warming clean
dishes and serving plates for the serving of hot foods.
The cycle will take approximately 32 minutes if selected.

a. Load clean plates and dishes to be warmed.

b. Select HEATED DRY.

c. Be sure the door is unlatched.

d. Slowly turn the Cycle Indicator Dial to 

PLATE WARMER.

e. Latch the door to start the cycle.

Wash Cycles

POTSCRUBBER

NORMAL WASH

LIGHT WASH

WATER SAVER

SHORT WASH

RINSE & HOLD

Water Use

Gallons

(approx.)

10.6

9.1

7.9

6.4

7.4

3.0

Wash Cycle

Time

Minutes

(approx.)

72

*

51*

51*

51*

43*

12

*

Rinse

Rinse

Rinse

Rinse

Main

Wash

Rinse

Rinse

Cycle Sequence

Rinse

Main

Wash

Rinse

Rinse

Rinse

Rinse

Rinse

*Unextended times. These cycle times will be increased approximately 21 minutes if TEMP BOOST option is selected.
Drying Options:

HEATED DRY. Available on all wash cycles except RINSE & HOLD. Add 32 minutes to wash cycle time.
ENERGY SAVER. Drying heater is turned off. Dishes dry naturally.

Rinse

Rinse

Main

Wash

Rinse

Rinse

Rinse

Main

Wash

Main

Wash

Rinse

Rinse

Rinse

Rinse

Rinse

Rinse

Cycle Selection Chart

Rinse

5

Quiet Power

CYCLE

ON

1

2

3

4

5

6

SHORT WASH

RINSE & HOLD

START

START DELAY

(HRS)

PLATE

WARMER

(PRESS

HEATED DRY)

OFF