49-90581-3
7
Getting started - Washer
USING THE W
ASHER
A
Washer Cycles
The washer cycle controls the type of washing process. The cycle selector knob can be turned in either direction.
Turning the knob after starting a cycle will stop the washer and change the cycle to the new selection. Press
Start
to begin the new cycle selection.
The chart below will help you match the items to be washed with the best washer cycle settings. For optimal
performance, select the cycle that most closely matches the items being washed. Selections shown in
bold
are
the recommended settings for that cycle.
Off
- Washer is turned off and the
Start
button does not function.
NOTE:
When the control is turned to Off, the
Status
lights are off.
NOTE:
The cycle selector does not rotate during the operation of the washer.
Items to Wash
Cycle
Wash Temp
Cycle Details
Cycle for normal, regular,
or typical use for washing
up to a full load of normally
soiled cotton clothing.
Colors
Medium/
Normal
Hot
Warm
Colors
Cool
Cold
Tap Cold
Use
Colors Medium/
Normal
cycle for normal, regular, or typical use for
washing up to a full load of normally soiled cotton clothing. Choose the
Warm or Hot water temperature selection as appropriate for your clothes
load for a higher degree of cleaning. Incorporates multi-stage fills and
wash periods to provide optimal fabric care.
Whites and household linens
Whites
Hot
Warm
Colors
Cool
Cold
Tap Cold
Cycle tailored to clean and brighten your whites.
Large coats, bed spreads,
mattress covers, sleeping
bags, and similar large
bulky items.
Bulky
Items
Hot
Warm
Colors
Cool
Cold
Tap Cold
Provides a max fill wash water level to wash bulky items. Also incorporates a
deep fill rinse to effectively rinse bulky items.
Casual clothes, lightly
soiled office wear.
Casuals
Hot
Warm
Colors
Cool
Cold
Tap Cold
Wash cycle tailored to care for casual clothes and office wear items.
Incorporates multi-stage fills and wash periods to provide optimal fabric care.
Lingerie and special care
fabrics with light soil.
Delicates
Hot
Warm
Colors
Cool
Cold
Tap Cold
Utilizes a gentle agitate profile and a low spin speed to provide special care
to delicate fabrics. It is recommended to place small or ultra delicate items in
mesh bags before washing.
Small loads of lightly soiled
items that are needed in a
hurry.
Speed
Wash
Hot
Warm
Colors
Cool
Cold
Tap Cold
Utilizes an expedited wash cycle and time-saving continuous spray rinse to
clean small lightly soiled loads in the fastest time possible.
Wet load of items. For items
that need only to be rinsed,
use this cycle with 2nd Rinse
option (on some models).
Drain &
Spin
Utilizes a high speed spin to extract water from wet items. For items that
need to be rinsed, select the 2nd Rinse option (on some models) when
using this cycle.
Your washer has a security system that prevents opening
the lid during the spin cycle. The lid lock prevents anyone
(especially children) from reaching into the washer while
the basket is spinning. The lid lock will release within 5
seconds after the basket stops spinning.
Trying to open the lid while locked could result in injuries.
If the lid does not unlock after spinning, please contact
service.
NOTE:
If there is a power outage the lid lock can take 3
minutes to release.
