GE M
EDICAL
S
YSTEMS
D
IRECTION
2392751-100, R
EVISION
3
V
IVID
™ 4 S
ERVICE
M
ANUAL
3-36
Section 3-6 - System Configuration
Section 3-6
System Configuration
Once all the required peripherals have been installed and the unit has been switched on, configure the
system settings in the
System Configuration
window tabs. Refer to the Vivid™ 4 User Manual for
additional information about system configuration.
3-6-1
Adjusting the Display Monitor
The
display
monitor’s contrast and brightness
controls may need periodic adjustment due to changes
in ambient light. They can be adjusted using the
Contrast
and
Brightness
buttons on the front part of
the display monitor.
All display monitor controls, other than the contrast and brightness controls, are factory adjusted for
optimum settings and usually do not require further adjustment.
For details on adjusting the display monitor settings, refer to
Vivid™ 4 17" Monitor Operation &
3-6-2
Hospital Info Tab
1) Press
Config
on the alphanumeric keyboard. The
System Configuration
window is displayed with
the
Hospital Info
tab selected, as shown below:
Figure 3-22 Hospital Info Tab
2) In the
Hospital Info
tab, enter the required information in the appropriate fields.
3) Trackball to the
OK
button and press
Select
.
