GE M
EDICAL
S
YSTEMS
D
IRECTION
2392751-100, R
EVISION
3
V
IVID
™ 4 S
ERVICE
M
ANUAL
Chapter 1 - Introduction
1-3
1-1-4
Vivid™ 4 Models Covered in this Manual
The Vivid™ 4
models documented in this manual are shown in
NOTE:
The difference between the two types of Vivid™ 4 BT03 models are as follows:
On RFI models (supported by software version 4.2, and above), Image Port, RFT, and FEC functionality
are all incorporated into one board - the RFI board.
For RFT models (supported by software versions below 4.2), the Image Port, RFT, and FEC boards are
all separate components.
NOTE:
Vivid™ 4 systems with Serial No 10500 and above, have the RFI system hardware configuration. All
systems with a serial number prior to this (i.e. 10499 and below) are configured with RFT hardware.
Table 1-2
Vivid™ 4 BT03 - RFI Models
Model
Cat No.
Description
BASE Vivid 4 Console
Vivid 4 BT03
console, 220-240V AC, RFI
H45011FT
An advanced version of the Ultrasound Scanning
Systems based on the Vivid product line. Enables a
larger variety of probes and larger application use.
Vivid 4 BT03
console, 100V AC, RFI
H45011FW
Vivid 4 BT03
console, 110-120V AC, RFI
H45011FY
Vivid 4 BT03
console, 220-230V AC / NTSC, RFI
H45011FZ
Vivid 4 BT03 console, NTRL, RFI
H45531JC
Table 1-3
Vivid™ 4 BT03 - RFT Models
Model
Cat No.
Description
BASE Vivid 4 Console
Vivid 4 BT03
console, 220-240V AC
H45011DT
An advanced version of the Ultrasound Scanning
Systems based on the Vivid product line. Enables a
larger variety of probes and larger application use.
Vivid 4 BT03
console, 100V AC
H45011DU
Vivid 4 BT03
console, 110-120V AC
H45011DV
Vivid 4 BT03
console, 220-230V AC / NTSC
H45011DW
Vivid 4 BT03 console, NTRL
H45531GC
