GE M
EDICAL
S
YSTEMS
D
IRECTION
2392751-100, R
EVISION
3
V
IVID
™ 4 S
ERVICE
M
ANUAL
Chapter 8 - Replacement Procedures
8-15
8-2-8-4
Control Console Upper Cover (Front) Installation Procedure
1) Raise the control console to its
maximum
height.
2) Return the upper cover (front section) to the Vivid™ 4 control console, making sure it is placed in
the correct position (with screw holes properly aligned).
3.) Turn the metal securing plates underneath the rear of the upper front cover (refer to
to fasten the front cover to the upper rear cover and tighten the 2 screws.
4) Return and fasten the 12 screws (6 on each side and 2 in the front as shown in
) to
secure the upper front cover in place.
5.) Raise the front and rear sections of the
control console lower cover up into position and tighten the
screws to fasten the lower cover securely. For details refer to the
6.) Return the control console lower rear cover, as described in the
