– 14 –
REVERSING THE DOOR SWING
PLASTIC HANDLE ASSEMBLY
6. Remove the handle screws from the top of the
fresh food door. Remove the handle screws from
the bottom of the freezer door.
7. Remove the door handle on the fresh food
door by sliding the handle up off of the fastener.
Remove the door handle on the freezer door by
sliding the handle down off of the fastener.
8. Change places between the handle fastener
and plug button on door front.
9. Move the plug buttons on the top and front of
the door to the opposite side of the door.
10. Transfer the door stop on the bottom of the door.
11. Attach handle to the fresh food door by sliding
the handle down onto the fastener and with the
screws at top of handle.
12. Attach the handle to the freezer door by sliding
the handle up onto the fastener and with the
screws at the bottom of the handle.
13. Attach badge on freezer door opposite of the
handle.
TO RE-HANG THE DOORS
1. Remove the hinge pin from the lower hinge
bracket.
2. Remove the lower hinge bracket.
3. Install the bottom hinge bracket on the opposite
side of the opening.
4. Install the lower hinge pin into the hinge bracket
hole to the outside of the refrigerator.
5. Remove the center hinge bracket.
6. Install the center hinge bracket on the opposite
side of the opening. (Turn the hinge over to
install.)
7. Position the fresh food door, tilted forward, over
the lower hinge pin and slide it into place.
8. Install the center hinge pin into the center hinge
bracket and into the hole in the fresh food door.
Make sure the washer is in place over the hinge
pin on top of the bracket.
9. Place the freezer door on top of the center hinge
pin.
10. With the freezer door in place, install the top
hinge into the top of the freezer door. The holes
in the hinge will align with two of the holes on
top of the refrigerator. Install the two screws into
the top hinge.
