3-32
6" QuickPanel* View Basic, Monochrome, Thin Bezel – September 2010
GFK-2328B
3
To change the DRAM memory allocation
1. In the Control Panel, double-tap
System.
The
System Properties
dialog box appears.
2. On
the
Memory
tab, drag the slider to divide the DRAM into
Storage
and
Program
memory.
The amount of memory allocated to and used by each area is shown on
the dialog box. The amount of memory allocated to and used by each
area is displayed numerically. The blue bar indicates the current
amount of unallocated DRAM and determines the boundaries within
which the slider can move.
3. Tap
OK
to apply the new setting.
4. To save the settings, run the
Backup
utility. (See page 2-7.)
Boot Loader ROM
The Boot Loader ROM provides 512 KB of non-volatile storage for the
QuickPanel View’s initialization program. This program configures the
QuickPanel View hardware then starts the operating system’s execution. This
memory is not accessible from Windows CE Explorer, nor should any attempts
be made to modify the contents of this ROM.
