D e t a i l e d O p e r a t i o n
Other Subsystems
GFK-2357A
6" QuickPanel View Keypad
57
To remove the internal battery
1. Disconnect AC power from the 24VDC supply.
2. Open the rear access panel.
3. Release the battery by
gently
lifting it from the completely exposed side, past the small protrusions. To avoid
breaking the battery retainer clips, do not apply excessive upward pressure.
4. Slide the battery out of its carrier, noting the arrow on the carrier indicating the direction of removal.
R e a l - t i m e C l o c k
The QuickPanel View Keypad has a programmable real-time clock capable of
reporting the current time in Year/Month/Day/Hour/Minute/Second. The time is set
from the Windows CE interface and retained through a power cycle if battery
backup is available. Daylight saving time is enabled by a check box within the
dialog box. The time can be displayed in the system tray on the task bar.
To set the real -time cloc k
1. In the
Control Panel, double-tap
Date/Time
.
The
Date/Time Properties
dialog box appears.
Note:
Tap Apply after making changes in any box.
2. To modify the date, select the Date/Time tab.
3. Tap the year to choose a new year; tap the month to choose a new month.
4. Tap a date to specify the day of month.
5. From the
Time Zone
box, choose your zone.
6. Select
Auto Adjust DST
to have the clock automatically compensate for daylight savings time.
7. In the
Current Time
box, adjust the hours, minutes and seconds.
8. Tap
OK
to finish.
Summary of Contents for IC754VGI06SKD
