GE Interlogix 0150-0265A, User Manual

ProBridge Gateway 

GE Interlogix 

0150-0265A / August 2003 

11 

Camera number 

Mapped camera: Camera (site) # low byte 

“Monitor “ value 

Preset number value 1 to 16 (for Preset 1 to 16) 
(General command parameter) 

Checksum 

2’s complement

4.1.3 

M

OVEMENT 

S

PEED

: 

4.1.3.1  P

AN

, T

ILT

, 

AND 

Z

OOM 

(PTZ)

WaveReader: Variable speed range 0 – 15 (Pan & Tilt) based on variable Pan & 
Tilt speed value from WaveReader, will be converted to range 1-32 on the 
Kalatel RS485 network. (Zoom: fixed at 10 at Kalatel RS485 network)  

Two messages are generated for controlling PTZ: Motor message and Variable 
Speed message. The ProBridge Gateway combines these two into one message 
as follows: 
      

Port 0:

 Example with PTZ messages on WaveReader. 

Motor Message format:  

Synchronization  

0xFF 

Length 

0x07 

Message type 1 

0x09 

Message type 2  

0x05 

Destination 

Impac Mux/DVMRe  

Source    

Impac Mux/DVMRe 

Camera number 

Camera connected to Mux/DVMRe (00-0F) 

Motor command 

Impac motor command 

Checksum 

2’s complement

Variable Speed Message format:  

Synchronization  

0xFF 

Length 

0x0B 

Message type 1 

0x09 

Message type 2  

0x0C 

Destination 

Impac Mux/DVMRe  

Source    

Impac Mux/DVMRe 

Camera number 

Camera connected to Mux/DVMRe (00-0F) 

Pan speed 

Pan speed value 

Tilt speed  

Tilt speed value 

Zoom speed 

Zoom speed value 

Focus speed 

Focus speed value 

Iris speed  

Iris speed value 

Checksum 

2’s complement 

Port 1:

  PTZ message at KTD405. Message type 1=0x09, Message type 2=0x14  

Message format: 

Synchronization  

0xFF 

Length 

0x09 

Message type 1 

0x09 Telemetry message type 1 

Message type 2  

0x14 New PTZ packet  

Destination 

0x00-0xFD Zone = Desti 1 (Mapped camera)