1.
2.
3.
4.
5.
6.
7.
TIMER
ON/OFF
CLOCK
STOP
TIME
ME
Press this
to cancel
oven
8.
operations except clock and timer.
PROGRAM STATUS. Words light up in the
display indicate what is in time display.
Programmed information can be displayed at any
time by pressing the pad of the operation you want
9.
to see. For example, you can display the current
time of day while the timer is counting down by
AUTO
SELF
CLEAN
BROIL
Hi/LO
BAKE
COOK
&
CLOCK. Press this pad before setting the clock.
To set the clock, first press the CLOCK pad.
Then press the INCREASE or DECREASE
pad to change the time of day. Press the CLOCK
pad to start.
STOP TIME. Use this pad along with the
COOK TIME or the CLEAN pad to set the oven
to stop automatically at a time you select.
pressing the CLOCK pad.
10. COOK TIME. Press this pad for Timed Bake
TIME DISPLAY. Shows the time of day, the
operations.
times set for the timer or automatic oven operation.
11. AUTO SELF CLEAN. Press this pad to select
OVEN TEMPERATURE AND BROIL
the self-cleaning function. See the Operating the
DISPLAY. Shows the oven temperature or the
Self-Cleaning Oven section.
broil setting selected.
12. BROIL. Press this pad to select the broil function.
FUNCTION INDICATORS. Lights up to
13.
BAKE. Press this pad to select the bake function.
show whether oven is in the bake, broil or
clean mode.
14. DECREASE. Short taps to this pad decrease the
INCREASE. Short taps to this pad increase the
time or temperature by small amounts. Press
hold the pad to increase the time or temperature
by larger amounts.
TIMER ON/OFF. Press this pad to select the
timer function. The timer does not control oven
operations. The timer can time up to 9 hours
55 minutes.
To set the timer, first press the TIMER ON/OFF
pad. Then press the INCREASE or DECREASE
pad to change the time.
To cancel the timer, press and hold the TIMER
ON/OFF pad until the word “TIMER” disappears
from the display.
time or temperature by-small
Press and
hold the pad to decrease the time or temperature
by larger amounts.
If “F- and a number” flash in the display and
the oven control signals, this indicates function
error code. function error code appears during
the self-cleaning function, check the oven door
latch—the latch handle may have been moved,
even if
slightly, from the latched position.
Make sure handle is to the right as far as it will go.
Press the CLEAR/OFF pad. Allow the oven to
cool for one hour. If function error code repeats,
disconnect power to the range and call for service.
11
