FEATURES
OF YOUR OVEN CONTROL
1.
2.
3.
4.
5.
6.
7.
r
CLEAR
OFF
TIMER
CLOCK
STOP
ON/OFF
TIME
TIME
.
COOK
TIME
I
Press this pad to cancel all
oven operations except clock and timer.
PROGRAM STATUS. Words light up in the
display to indicate what is in time display.
Programmed information can be displayed at any
time by pressing the pad of the operation you want
to see. For example, you can display the current
time day while the timer is counting down by
pressing the CLOCK pad.
TIME DISPLAY. Shows the time of day, the times
set for the timer or automatic oven operation.
OVEN TEMPERATURE AND BROIL
DISPLAY. Shows the oven temperature or the
broil setting selected.
FUNCTION INDICATORS. Lights up to
show whether the oven is in the bake, broil or
clean mode.
INCREASE. Short taps to this pad increase the
time or temperature by small amounts. Press and
hold the pad to increase the time or temperature by
amounts.
TIMER
Press this pad to select the timer
function. The timer does not control oven operations.
The timer can time up to 9 hours and 55 minutes.
To set the timer, first press the TIMER ON/OFF
pad. Then press the INCREASE or DECREASE
pad to change the time.
To cancel the timer, press and hold the TIMER
ON/OFF pad until the word “TIMER” disappears
from the display.
fib
8. CLOCK. Press this pad before setting the clock.
9.
10.
12
13.
To set the clock, first press the CLOCK pad.
Then press the INCREASE or DECREASE pad
to change the time
day. Press the CLOCK pad
to start.
STOP TIME. Use this pad along with the COOK
TIME or the CLEAN pad to set the oven to stop
automatically at a time you select.
COOK TIME. Press this pad for Timed Bake
operations.
AUTO SELF CLEAN. Press this pad to select
the self-cleaning function. See the Operating the
Self-Cleaning Oven section.
BROIL. Press this pad to select the broil function.
BAKE. Press this pad to select the bake function.
DECREASE. Short taps to this pad decrease
the time or temperature by small amounts.
Press and hold the pad to decrease the time or
temperature by larger amounts.
If “F-and a number” flash in the display and
the oven control signals, this indicates function
error code. If the function error code appears
during the self-cleaning function, check the oven
door latch—the latch handle may have been
moved, even if only slightly, from the latched
position. Make sure the handle is to the right as far
as it will go. Press the CLEAR/OFF pad. Allow
the oven to cool for one hour. If function error
code repeats, disconnect the power to the range
and call for service.
14
