background image

REGULAR

Do not lock the 

 during regular roasting.

The latch is used for self-cleaning only.

Roasting is cooking by dry heat. Tender meat or

poultry 

 be roasted uncovered in your oven.

Roasting temperatures, which should be low and
steady, keep spattering to a minimum.

Roasting is really a baking procedure used for meats.

Therefore, oven controls are set for Baking or Timed

Baking. (You may hear a slight clicking sound,
indicating the oven   working properly. ) Timed
Baking will turn the oven on and off automatically.

ROASTING

Most meats continue to cook slightly while standing,

after being removed from the oven. Standing time
recommended for roasts is 10 to 20 minutes. This
allows roasts   firm up and makes them easier to
carve. Internal temperature will rise about 5° to

 to compensate for temperature increase, if

desired, remove the roast from the oven sooner
(at 5° to 10”F. less than the temperature in the
Regular Roasting Guide).

Remember that food will continue to cook in the
hot oven and therefore should be removed when
the desired internal temperature has been reached.

1. Place the shelf in A or B position. No preheating

When the oven starts to heat, the word “ON” and

is necessary.

the changing oven temperature, starting at 100”F.,

2. Check the weight of the meat. Place it, fat-side-up

 poultry breast-side-up) on   trivet in   shallow

pan. The melting fat will baste the meat. Select a
pan as close to the size of the meat as possible.

 broiler pan with grid is a good pan for this.)

3. Press the BAKE pad.

BAKE

n

 4. Press the INCREASE

     

 DECREASE pad. The

last oven set temperature
appears in the display.

 pressing the

pad until the desired
temperature is displayed.

will be displayed. When the oven reaches the
temperature you set, a tone will sound.

5. Press the CLEAR/OFF pad when

CLEAR

roasting is finished.

OFF

To change the oven temperature during
roasting, 
press the BAKE pad and then the

INCREASE or DECREASE pad to get the
new temperature.

Use of Aluminum Foil

You can use aluminum foil to line the broiler pan.

This makes clean-up easier when using the pan for
marinating, cooking with fruits, cooking heavily
cured meats or basting food during cooking. Press
the foil tightly around the 

 of the pan.

34

Summary of Contents for JBP80

























































Reviews: