How to Delay Start of Cleaning
Quick Reminder:
1. Latch the oven door.
2. Press the AUTO SELF CLEAN pad.
3. Press the INCREASE or DECREASE pad
until
Clean Time appears.
STOP TIME pad.
5. Press the INCREASE or DECREASE
until
the desired Stop Time appears in the display.
setting the oven timer to start the clean
cycle automatically at later time than the present
time of day.
beginning, make sure the oven clock
the correct time day.
1.
steps
prepare the oven for cleaning.
2.
the latch handle to the right far as it will go.
3. Press the AUTO SELF CLEAN pad.
4. Press the
DECREASE pad to
enter the Clean Time.
5. Press the STOP TIME pad. The earliest Stop Time
will be the Clean Time selected plus the time
day. For example: If the Clean Time is 3 hours and
the time of day is
the Stop Time that appears in
the display will be
6. Press the INCREASE pad to change the Stop Time
to a later time of day if desired. For example: If
you set Stop Time 11
oven will start clean
cycle at
end at 11
The self-clean cycle will automatically begin after
“CLEAN” is displayed and the time for the Clean
Cycle is set. The words “ON” and “LOCK”’ will
appear in the display. It will not be possible to open
the oven door
the temperature drops below the
lock temperature and the LOCK light goes off.
7. When the LOCK
is off, slide the latch handle
to the left and open the door.
NOTE: During a delayed self-clean operation you
can find out when the oven is set to turn on by
pressing and holding the AUTO SELF CLEAN pad
for seconds.
Questions and Answers
Q. If my oven clock is not set to the correct time of
day, can still self-clean
oven?
A. If the
is not set to the correct time of
you
will not be able set delay clean to end at a
specific time.
Q.
I use commercial oven cleaners on any part
of my self-cleaning oven?
A.
cleaners or coatings should be
used
around any
part of this
If you do use them and do not
rinse
oven with water. wiping it
afterwards, the residue can scar
the oven surf-ace and
metal parts the next
time the
automatically cleaned.
Can I cook
on the cooktop while the oven
is self-cleaning?
A.
While the oven is self-cleaning,
can use
just
normally do.
causes the hair-like lines on the enameled
surface my oven?
This
normal condition, resulting from heating
and
i
i
These i nes do not
how your oven performs.
Should there be anv odor during the cleaning?
“
A.
an odor during the first few
clean
Failure to wipe
excessive soil might
strong
when cleaning.
Q.
oven shelves do not slide easily.
What is the matter?
A. After many cleanings, oven shelves will lose their
luster and become hard to slide. To make
shelves slide more easily, wipe the shelf supports
with cooking oil.
Q. What should I do if excessive smoking occurs
during cleaning?
A. This is caused by excessive soil. Press the
CLEAR/OFF pad. Open the windows to rid the
room of smoke. Wait until the oven has cooled and
the word “LOCK” is off in the display. Wipe up
the excess soil and reset the clean cycle.
Q. Is the “crackling” or “popping” sound I hear
during cleaning normal?
Yes. This is the sound
the metal heating and
cooling during both cooking and cleaning functions.
Why do I have ash left in my oven after cleaning?
Some types of soil will leave a deposit which is
ash. It
be removed with a damp sponge or cloth.
Q. My oven shelves have become gray after the
self-clean cycle. Is this normal?
A. Yes. After the self-clean cycle, the shelves will
lose some luster and change to a deep gray color.
43
