GE JBP99, Installation Instructions Manual

TOOLS YOU WILL NEED

FOR YOUR SAFETY:

All rough-in and spacing dimensions must be
met for safe use of your range. Electricity to
the range can be disconnected at the outlet
without moving the range if the outlet is in
the preferred location (remove lower drawer).

To reduce the risk of burns or fire when
reaching over hot surface elements, cabinet
storage space above the cooktop should be
avoided. If cabinet storage space is to be
provided above the cooktop, the risk can 
be reduced by installing a range hood that
sticks out at least 5” beyond the front of the
cabinets. Cabinets installed above a cooktop
must be no deeper than 13”

.

Be sure your appliance is properly installed
and grounded by a qualified technician.

Make sure the cabinets and wall coverings
around the range can withstand the temperatures
(up to 200°F.) generated by the range.

2

Installation Instructions

PREPARE TO INSTALL THE RANGE

MATERIALS YOU MAY NEED

Anchor Sleeves

Lag Bolts

(For Anti-Tip Bracket Mounted 

on Concrete Floors Only)

3-Wire Cord

4‘ Long

4-Wire Cord  

OR

4‘ Long

(UL Approved 40 AMP)

Adjustable Wrench

Level

1/4” Nut Driver

Phillips Screwdriver

Drill with 1/8” Bit

Pencil

Safety Glasses

Tape Measure

Pliers

Flat-blade

Screwdriver

PARTS INCLUDED

Anti-Tip Bracket Kit

REMOVE SHIPPING MATERIALS

Remove packaging materials. Failure to
remove packaging materials could result
in damage to the appliance.

1

Squeeze Connector

(For Conduit

Installations Only)

Tin Snips