13
Safety Instr
uctions
Operating Instr
uctions
Car
e and Cleaning
Tr
oubleshooting T
ips
Customer Ser
vice
Adjust the oven thermostat—Do it yourself!
You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few
weeks to become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust
the thermostat yourself.
Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your
oven. These thermometers may vary 20–40 degrees.
To Adjust the Thermostat
Pull the
OVEN CONTROL
knob off the
shaft, look at the back of the knob and
note the current setting before making
any adjustment. The knob is factory set
with the top screw directly under the
pointer.
Pull off the
OVEN CONTROL
knob.
Loosen both screws on back of
the knob.
Hold both parts of the knob as
shown in the illustration of the
back of the
OVEN CONTROL
knob
and turn so the lower screw moves
in the desired direction. You will
hear and feel the notches as you
turn the knob. Each notch changes
temperature about 10° Fahrenheit.
Tighten the screws.
Return the
OVEN CONTROL
knob to
the oven.
Re-check oven performance before making any
additional adjustments.
Back of the OVEN CONTROL knob.
Lower screw moves toward hotter
or cooler.
The lower screw moves toward
HOTTER to increase the temperature.
The lower screw moves toward
COOLER to decrease the temperature.
