GE JBS10 series, Owner'S Manual

Not all features are on all models.

Not all features are on all models.

Clock (on some models)

To Set the Clock

The clock on your range is powered by the 

range itself. No batteries are necessary. The 

time is displayed with no timer or audible alarm. 

To set the clock, 

turn the stem left or right.

To clean the clock,

 see instructions on page 23.

For any repairs,

 call a qualified service 

technician. 

The clock must be set to the correct time  

of day for the automatic oven  timing functions 

to work properly. The time of day cannot be 

changed during a delayed cooking or a delayed 

self-cleaning cycle.

   Touch the 

Clock

 pad twice.  

For models without a 

Clock

 pad:  

Hold the 

+

 and 

-

 pads for 3 seconds.

   Touch the 

+

 or 

–

 pads.

If the 

+

 or 

–

 pads are not touched within one 

minute after Step 1, the display reverts to the 

original setting. If this happens, repeat Step 1 

and reenter the time of day.

   Touch the 

Start/On

 pad until the time of 

day shows in the display. This enters the 

time and starts the clock.

To check the time of day when the display is 

showing other information, simply touch the 

Clock

 pad. The time of day shows until another 

pad is touched.

Make sure the clock is set to the 

correct time of day.

To Turn Off the Clock Display

If you have several clocks in your kitchen, you 

may wish to turn off the time of day clock 

display on your range.

   Touch the 

Clock

 pad once to turn off the 

time of day display. Although you will not 

be able to see it, the clock maintains the 

correct time of day.

   Touch the 

Clock

 pad twice to recall the 

clock display.

For models without a 

Clock

 pad:

   Touch the 

Bake

 and 

Broil Hi/Lo

 pads at 

the same time until the display shows 

SF

.

   Touch the 

Timer

 pad. The display will show 

ON

 (Clock display on). Touch the 

Timer

 pad 

again until the display shows 

OFF

 (Clock 

display off).

   Touch the 

Start/On

 pad to leave the 

control set in this mode.

NOTE:

 If the clock cannot be recalled or it 

will not stay permanently displayed, the Energy 

Saver Mode feature is on. To turn the feature 

off, see the Energy Saver Mode section.

15

12

6

3

9

Using the clock and timer. 

GEAppliances.com