GE JBS10 series, Owner'S Manual

Do not use a steel wool pad; it will scratch the 

surface.

To clean the stainless steel surface, use warm, 

sudsy water or a stainless steel cleaner or 

polish. Always wipe the surface in the direction 

of the grain. Follow the cleaner instructions for 

cleaning the stainless steel surface.

To inquire about purchasing stainless steel 

appliance cleaner or polish, or to find the 

location of a dealer nearest you, please call our 

toll-free number:

National Parts Center 

1.800.626.2002

GEAppliances.com

Stainless Steel Surfaces

(on some models)

Be sure all controls are off and all surfaces are cool before cleaning any part of the range.

 If your range is removed for cleaning, servicing or any reason, be 

sure the anti-tip device is reengaged properly when the range is 

replaced. Failure to take this precaution could result in tipping of 

the range and can result in death or serious burns to children or 

adults.

Control Panel

It’s a good idea to wipe the control panel after each 

use of the oven. Use a damp cloth to clean or rinse. 

For cleaning, use mild soap and water or a 50/50 

solution of vinegar and water. For rinsing, use clean 

water. Polish dry with a soft cloth.

Do not use abrasive cleansers, strong liquid cleaners, 

plastic scouring pads or oven cleaners on the control 

SDQHO³WKH\ZLOOGDPDJHWKHILQLVK

Painted Surfaces

Painted surfaces include the sides of the range and 

the door, top of control panel and the drawer front. 

Clean these with soap and water or a vinegar and 

water solution.

Do not use commercial oven cleaners, cleaning 

powders, steel wool or harsh abrasives on any 

painted surface.

How to Remove Protective Shipping Film and Packaging Tape

Carefully grasp a corner of the protective shipping 

film with your fingers and slowly peel it from the 

appliance surface. Do not use any sharp items to 

remove the film. Remove all of the film before using 

the appliance for the first time.

To ensure no damage is done to the finish of the 

product, the safest way to remove the adhesive from 

packaging tape on new appliances is an application 

of a household liquid dish washing detergent. Apply 

with a soft cloth and allow to soak.

NOTE:

 The adhesive must be removed from all parts. 

It cannot be removed if it is baked on.

Control Knobs

The control knobs may be removed for easier 

cleaning.

Make sure the knobs are in the 

OFF

 positions and 

pull them straight off the stems for cleaning. 

The knobs can be cleaned in a dishwasher or they 

may also be washed with soap and water. Make 

sure the inside of the knobs are dry before replacing.
Replace the knobs, in the 

OFF

 position to ensure 

proper placement.

Porcelain Enamel Cooktop

(on some models)

The porcelain enamel finish is sturdy but 

breakable if misused. This finish is acid-

resistant. However, any acidic foods spilled 

(such as fruit juices, tomato or vinegar) should 

not be permitted to remain on the finish.
If acids spill on the cooktop while it is hot, use 

a dry paper towel or cloth to wipe it up right 

away. When the surface has cooled, wash with 

soap and water. Rinse well.
For other spills such as fat spattering, wash 

with soap and water or cleansing powders 

after the surface has cooled. Rinse well. Polish 

with a dry cloth.

Care and cleaning of the range. 

GEAppliances.com

WARNING

21