GEAppliances.ca
Problem
Possible Causes
What To Do
Food does not
broil properly
Improper rack position
•
See the
Broiling guide.
being used.
Food being cooked in a hot pan.
•
Use the broiling pan and grid that came with your range.
Make sure it is cool.
Aluminum foil used on the
•
See the
Using the oven
section.
broiling pan and grid has
not been fitted properly
and slit as recommended.
In some areas the power
•
Preheat the broil element for 10 minutes.
(voltage) may be low.
•
Broil for the longest period of time recommended
in the
Broiling guide
.
Control signals after
You forgot to enter a bake
•
Press the
BAKE
pad and desired temperature or the
CLEAN
entering cooking time
temperature or cleaning time.
pad and desired clean time.
or delay start
Display flashes "bAd"
The installed connection
•
Contact installer or electrician to correct miswire.
then "linE" with a
from the house to the unit
loud tone
is miswired.
Surface units do
not work
There has been a main power
supply surge and/or a power
interruption and surge
•
On the Control Panel, activate the Self Clean mode
(press the SELF CLEAN button)
•
Wait for 30 seconds and then press the OFF button.
•
The cooktop should now be ready to operate
The words “CLOSE
DOOR” flashes or
scrolls in the display
This is a normal condition.
The “CLOSE DOOR” is a reminder
message to keep the oven door
closed during broil mode
•
This is normal. Keep oven door closed during broil mode
34
Consumer
S
uppo
rt
Tr
oubleshooting
Tip
s
Care and Cleaning
Operating
Instruction
s
Safety
Instruction
s
Summary of Contents for JCBS660
Page 39: ...39...