HOW DOES THIS
COMPARE
TO YOUR OLD ONE?
new
has electric coil surface units.
The best types of cookware to use, plus heat-up and
If you are used to cooking with gas burners or other
cool-down times, depend upon the type of burner or
types
of electric
you will notice some
surface unit you have.
differences when you use electric coils.
Type of
Electric Coil
o
Radiant
(Glass Ceramic)
o
Induction
.\\
\\
~,.,,,,,,,\\\
Gas Burners
-—-
‘
Description
Flattened metal
tubing
containing
electric resistance
wire suspended
over a drip pan.
Electric coils
under a
ceramic
High frequency
induction coils
under a glass
surface.
Solid cast iron
disk sealed to the
surface.
Regular or sealed
gas burners use
either
gas
or natural gas.
The
chart will
YOU
to
differences
surface units and any
other type of
you may have used in the past.
How It Works
Heats by direct contact with the pan and by heating the
under the pan. For best
cooking results, use good quality pans. Electric coils are more forgiving of
warped pans than radiant or solid disks. Heats
up quickly but does not change
heat settings as quickly as gas or induction. Electric coils stay hot enough to
continue cooking for a short time after they are turned off.
Heat travels to the glass surface and then to the cookware, so pans must be flat on
the bottom for good cooking results. The glass
stays hot enough to
continue cooking after it is turned off. Remove the pan from the surface unit if
you want cooking to stop.
Pans must be made of ferrous metals (metal that attracts a magnet). Heat is
produced by a magnetic circuit between the coil and the pan. Heats up right away
and changes heat settings right away, like a gas
After turning the control
off, the glass
is hot from the heat of the pan, but cooking stops right away.
Heats by direct contact with the pan, so pans must be flat on the bottom for good
cooking results. Heats up and cools down more slowly than electric
The
disk stays hot enough to continue cooking after it is turned off. Remove the pan
from the solid disk if you want the cooking to stop.
Flames heat the pans directly. Pan flatness is not critical to cooking results, but
pans should be well balanced. Gas burners heat the pan right away and change
heat settings right away. When you turn the control off, cooking stops right away.
7