FEATURES OF YOUR OVEN CONTROL
1. INCREASE. Short taps to this pad increase the
time or temperature by small amounts. Press and
hold the pad to increase the time or temperature
by larger amounts.
2. DECREASE. Short taps to this pad decrease the
time or temperature by small amounts. Press and
hold the pad to decrease the time or temperature
by larger amounts.
3. BROIL. Press this pad to select the broil function.
4. BAKE. Press this pad to select the bake function.
5. CLEAN. Press this pad to select the self-cleaning
function. See the Operating the Self-Cleaning
Oven section.
6. COOK TIME. Press this pad for the Timed
Baking operations.
7. STOP TIME. Use this pad along with the COOK
TIME or CLEAN pad to set the oven to start
automatically at a time you select.
8. CLOCK. To set the clock, first press the CLOCK
pad. Then press the INCREASE or DECREASE
pad to change the time of day. Press the CLOCK
pad to start.
TIMER. Press this pad to select the timer
function. The timer does not control oven
operations. The timer can time up to 9 hours
and 55 minutes.
To set the timer, first press the TIMER pad.
Then press the INCREASE or DECREASE pad
to change the time.
To cancel the timer, press and hold the
TIMER pad.
10.
Press this pad to cancel all oven
operations except the clock and timer.
11. PROGRAM STATUS. Words light up in the
display to indicate what is in the time display.
13,
14.
Programmed information can be displayed at any
time by touching the pad of the operation you
want to see. For example, you can display the
current time of day while the timer is counting
down by pressing the CLOCK pad.
TIME DISPLAY. Shows the time of day, the times
set for the timer or the automatic oven operation.
OVEN TEMPERATURE AND BROIL
DISPLAY. Shows the oven temperature or the
broil setting selected.
FUNCTION INDICATORS.
to show
whether oven is in bake, broil or
mode.
If “F-” and a number flash on display,
and the oven control signals, this indicates
function error code. Press the
pad.
Allow the oven to cool for one hour. Put the oven
back into operation. If the function error code
repeats, disconnect the power to the range and
call for service.
10
