25
Consumer S
uppor
t
Operating Instructions
Safety Instructions
Installation
Instructions
Tr
oubleshooting Tips
GEAppliances.com
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the
Bake
and
Broil Hi/Lo
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
Clock
pad once. The display
will show
12 hr.
If this is the choice you
want, touch the
Start
pad.
Touch the
Clock
pad again to change
to the 24-hour military time clock. The
display will show
24 hr.
If this is the choice
you want, touch the
Start
pad.
Touch the
Clock
pad again to black out the
clock display. The display will show
OFF.
If
this is the choice you want, touch the
Start
pad.
NOTE:
If the clock is in the blackout mode,
you will not be able to use the Delay Start
function.
Control Lockout (on some models)
Your control will allow you to lock out the
touch pads so they cannot be activated when
touched or cleaning the glass panel.
To lock the controls:
Touch the
9
and
0
touch pads at the
same time for 3 seconds until the
control beeps twice. The display will
show
LOC
continuously and the time
of day if not blacked out.
NOTE:
All cooking and timing functions will be
cancelled when locking out the control.
To unlock the control, touch the
9
and
0
touch pads at the same time
for 3 seconds until the control beeps
twice, and
LOC
will be removed from
the display.
NOTE:
Some models have a
Control Lockout
pad. Touch and hold it for 3 seconds to
lock/unlock.
Gas/Control Lockout (on some models)
Your control will allow you to lock out the
surface burners, oven burners and control
panel so they cannot be activated.
To lock/unlock the controls:
Turn all surface burners off.
Touch and hold the
Gas/Control
Lockout
pad for 3 seconds until the
display shows
LOC ON
.
To unlock the control, touch and hold the
Gas/Control Lockout
pad for 3 seconds
until the display shows
LOC OFF
.
When this feature is on and the touch pads
are touched, the control will beep and the
display will show
LOC ON
.
■
The control lockout mode affects all
controls. No controls will work when this
feature is activated.
■
The adjustment will be retained in memory
after a power failure.
G
AS
/
C
ONTROL
L
OCKOUT
