Operating
Instructions
12
Safety
Instructions
Installation
Instructions
Tr
oubleshooting
Tips
Consumer
S
uppor
t
Bake/Temp Recall Pad
Touch this pad to select the bake function.
Bake Light
Flashes while in edit mode—you can change the
oven temperature at this point. Glows when the
oven is in bake mode.
Start/On Pad
Must be touched to start any cooking or cleaning
function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or self-
cleaning mode and the times set for the timer
or automatic oven operations. The display will
show
PRE
while preheating. When the oven
reaches the selected temperature, the oven
control will beep and the display will show the
oven temperature.
If “F– and a number or letter” flash in the display and
the oven control signals, this indicates a function error
code.
If your oven was set for a timed oven operation and a
power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there has
been a power outage. Reset the clock.
On models with an oven door latch, if the function error
code appears during the self-cleaning cycle, check the
oven door latch. The latch handle may have been moved,
even if only slightly, from the latched position. Make sure
the latch is moved to the right as far as it will go.
Touch the Clear/Off pad.
Allow the oven to cool
for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power
to the range and call for service.
Kitchen Timer On/Off Pad
Touch this pad to select the timer feature. Then
press the
+
and
–
pads to adjust the timer.
Kitchen Timer Light
Flashes while in edit mode—you can change the
set time at this point. Glows when the timer has
been activated. Flashes again when the time has
run out until the control is reset.
Clock Pad
To set the clock, press this pad twice and then
press the
+
and
–
pads. The time of day will
flash in the display when the oven is first
turned on.
Start Time Pad
Use along with the
Cooking Time
or
Self Clean
pads to set the oven to start and stop
automatically at a time you set.
Start Time Light
Flashes while in edit mode—you can change the
start time at this point. Glows when the function
has been activated.
Cooking Time Pad
Touch this pad and then touch the
+
or
–
pads
to set the amount of time you want your food
to cook. The oven will shut off when the cooking
time has run out.
Cooking Time Light
Flashes while in edit mode—you can change the
set time at this point. Glows when the function
has been activated. Flashes again when the time
has run out until the control is reset.
Throughout this manual, features and appearance may vary from your model.
Using the oven controls.
Oven Control, Clock and Timer Features and Settings
(on some models)
