– 17 –
Burner Bracket Removal
1. Remove the burners and top (see Burner and
Top Removal).
2. Remove the insulation blanket.
GEA00773
Graphite Gasket
Graphite Gasket
Igniter
Wire
Igniter
Wire
Retainer
Retainer
Burner Support
Burner Support
Burner Support
3. Remove the graphite gasket ring (glasstop
models only).
4. Compress the legs of the burner support and
lift up to remove.
GEA00774
1/4-in. Screw
1/4-in. Screw
1/2-in. Nut
1/2-in. Nut
5. Remove the 1/2-in. nut on the gas line to the
burner bracket.
6. Remove 2 screws (1/4-in.) and the igniter wire
from the burner bracket.
Note: When installing, be sure the igniter wire is
placed through the hole with the retainer clip.
Spark Module Removal
1. Remove insulation material if applicable.
2. Note positions and unplug the wires to the
spark module.
GEA00775
30-in. Model
30-in. Model
30-in. Model
Spark Module
Spark Module
1/4-in. Screw
1/4-in. Screw
3. Remove 2 screws (1/4-in.) and the mounting
bracket from the cooktop pan (30-in. models
only).
GEA00776
36-in. Model
36-in. Model
36-in. Model
Spark Module
Spark Module
1/4-in. Screw
1/4-in. Screw
4. Remove the 1/4-in. screw and the spark
module from the mounting bracket.
Summary of Contents for JGP628
