OPERATING THE SELF-CLEANING OVEN
(continued)
How to Set Oven for Cleaning
1.
Follow steps to prepare the oven for cleaning
2. Close the oven door.
3. Press the CLEAN pad.
CLEAN
4. Press the INCREASE or DECREASE pad until the
desired Clean Time is displayed.
Clean Time is normally 3 hours. You can change
the Clean Time to any time between 2 and 4 hours,
depending on the amount of
in
The self-clean cycle will automatically begin after
“CLEAN” is displayed and the word “ON” appears
in the display. When the oven heats to a high
temperature, the word “LOCK” will appear in the
display. It will not be possible to open the oven door
until the temperature drops below the lock temperature.
5. When the LOCK light is off, open the door.
NOTE: A fan may automatically turn on and off to
cool internal parts. This is normal and the fan may
continue to run even after the oven is turned off.
How to Delay Start of Cleaning
Quick Reminder:
1. Prepare the oven for cleaning.
2. Close the oven door completely.
3. Press the CLEAN pad.
4. Press the INCREASE or DECREASE pad until
the desired Clean Time appears.
5. Press the STOP TIME pad.
6. Press the INCREASE or DECREASE pad until
the desired Stop Time appears in the display.
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning make sure the oven clock
shows the correct time of day.
For example: Let’s say it’s
and you want the
oven to
self-cleaning at
after you’re
6. Press the STOP TIME pad.
STOP
appears in the display and “STOP
TIME
TIME” flashes.
The control automatically sets the Stop Time by
adding the Clean Time to the time of day. In this
example, the time of day is
and the Clean
Time is 3 hours. Adding 3 hours to the time of day
equals
7. Change the Stop Time from
to
by
the INCREASE pad until “
appears
in the display. The words “DELAY CLEAN” will
also appear in the display.
The self-clean cycle will automatically begin at
and finish at
The word “ON” will appear in the
display at
When the oven heats to a high temperature, the word
“LOCK” will be displayed. It
not be possible to
open the oven door until the temperature drops below
finished
kitchen.
oven is just soiled a normal
the lock temperature.
amount so the normal Clean Time of 3 hours is preferred.
When the clean cycle is finished, the word “CLEAN”
1. Prepare the oven for cleaning.
will go out in the display and the oven will begin to
cool. When the oven temperature has fallen below the
2. Close the oven door.
locking temperature, the word “LOCK” goes out and
n
3. Press the CLEAN pad.
the door can be opened.
CLEAN
8. When the LOCK light is off, open the door.
NOTE: A fan may automatically turn on and off to
n
4. Press the INCREASE pad. Three hours
cool internal parts. This is normal and the fan may
A
cleaning time is automatically set.
continue to run even after the oven is turned off.
5. If a
or shorter Clean Time
is
press the INCREASE or
DECREASE pad until the desired
Clean Time is displayed.