PROBLEM
“F” AND A NUMBER
FLASH IN THE DISPLAY
TOP BURNERS
NOT LIGHT
BURNERS HAVE
YELLOW OR
YELLOW-TIPPED
FLAMES
BURNER FLAMES
VERY LARGE
OR YELLOW
SURFACE BURNER
KNOBS WILL NOT
TURN
FOOD DOES NOT
BROIL PROPERLY
POSSIBLE CAUSE
If the time display flashes “F-” and a number, you have a function error code.
Press the CLEAR/OFF pad. Allow oven to cool for
hour. Put oven back
into operation. If the failure code repeats, disconnect all power to the range.
Call for service.
●
Make sure the electrical plug is plugged into a live, properly grounded
power outlet.
●
Gas supply not connected or not turned on.
●
Check for power outage.
●
Pan sitting on burner grate may be partially blocking the free air flow needed for
combustion. Remove pan and try again.
●
Burner holes on side of burner may be clogged. Remove and
them.
●
Burners not seated properly on burner supports. Reinstall them.
(A) Yellow
Yellow tips on inner
“Call for service
for LP gas
(C) Soft blue
Normal for natural gas
●
If burner flames look like (A), call for service. Normal burner flames should
look like (B) or (C), depending on the type of gas you use.
. With LP gas, some yellow tipping on inner cones is normal.
. If range is connected to LP gas, check
steps in
Installation Instructions.
●
To turn from OFF position, push the knob in and then turn.
●
Oven
not properly set. See the Broiling section.
●
The door is not closed.
●
Improper shelf position being used. See
Broiling section.
●
Food is being cooked on a hot pan.
●
Cookware is not suited for broiling.
Aluminum foil used on the broiler pan rack has not been fitted properly
and slit as recommended.
●
Oven bottom not securely seated in position.
(continued next
33