11 BAKE AND BROIL BuRNERs
A
chEcKINg thE OvEN BuRNERs
to check the bake burner flames with the oven door in the closed position:
A.
Open the door and remove it. (Optional—see Step 4.)
B.
Remove the oven racks.
c.
Remove the oven bottom.
Lift the oven bottom up at the rear and pull forward.
D.
Remove the four screws holding the burner baffle (flame spreader) to the burner box.
E.
Install and close the oven door.
F.
Turn on the bake burner.
The broil burner flames may be seen without removing the racks, oven bottom or bake baffles.
11 BAKE AND BROIL BuRNERs (cONt.)
B
ADJust thE AIR shuttER
WhAt ADJustMENt tO MAKE:
A.
If the flames are yellow, open the air shutter more than
the original setting.
B.
If the flames blow away or flutter from the burner,
close the air shutter more than the original setting.
MAKINg thE ADJustMENt:
A.
Bake burner: Remove the orifice fitting cover. The broil
burner is located and accessible in the top rear of the
oven.
B.
Using a screwdriver, loosen the air shutter adjustment
screw.
c.
Make the air shutter adjustment.
D.
Retighten the air shutter screw.
E.
Check the inner cone of the flame. It should be between 1/2” and 3/4”
(12.7 mm and 19.1 mm) long for the oven bake and broil burners.
WhEN ALL ADJustMENts ARE MADE AND thE REsuLts
ARE sAtIsFActORy:
A.
Replace the orifice fitting cover.
B.
Replace the burner baffle (flame spreader) and screws.
c.
Replace the oven bottom.
D.
Replace the oven door.
Orifice fitting
cover
Air shutter
Air shutter
screw
1/2" TO 3/4"
CONO INTERIOR
DE LLAMA
QUEMADOR PARA
HORNEAR/ASAR
Inner cone
of flame
Oven broiler
burner
1/2” to 3/4” (12.7 mm to 19.1 mm)
Air Shutter
Adjustment Screw
Dim. “A”
Air shutter adjustment
screw
Air shutter opening
