GE JKP16, Use And Care Manual

CONVECTION ROASTING

(continued)

How to Set Your Oven for Convection Roasting When Using the Temperature Probe 

–

NOTE:  For best results when roasting large
turkeys and roasts, we recommend using the probe
included in the convection oven. For correct
placement of the probe, see the description in the
Regular Roasting section.

The display will flash “PROBE” and the oven
control will signal if the probe is inserted into
the outlet, but the oven is not programmed for
the probe.

into the meat.

2. Plug the probe

into the outlet on the
oven wall. Make sure

1. 

 the offset shelf

in the lowest position
(A). Insert the probe

it is pushed all the
way in. Close the
oven door.

PROBE

the PROBE pad.

the INCREASE or DECREASE

A

pad until the desired internal probe
temperature is displayed.

CONV.

ROAST

5. Press the CONV. ROAST pad.

6. Press the INCREASE or DECREASE

pad. The last oven set temperature
appears in the display. Continue
pressing until the desired temperature
is displayed.

The oven will start automatically.
The words “CONV ON” and the
roasting temperature you set will
be in the display.

After a few seconds, the words “LO PROBE” will
replace the roasting temperature in the display.
After the internal temperature 

 the meat reaches

 the changing internal temperature will be

shown in the display.

7. When the internal temperature 

 the

CLEAR

meat reaches the number you have

OFF

set, the probe and the oven turn off
and the oven control signals. To stop

the signal, press the CLEAR/OFF pad.
Use hot pads to remove the probe
from the food. Do not use tongs to
pull on it—they might damage it.

CAUTION: To prevent possible burns, do not –
unplug the probe from the oven outlet until the oven
has cooled. Do not store the probe in the oven.

NOTE:

● 

If the probe is removed from the food before the

final temperature is reached, a tone will sound and
the display will flash until the probe is removed
from the oven.

● 

You will hear a fan while cooking with this feature.

The fan will stop when the door is opened but the
heat will not turn off.

● 

A second fan may automatically turn on and off to

cool internal parts. This is normal and the fan may
continue to run even after the oven is turned off.

● 

You can use the timer even though you cannot use

timed oven operations.

To change the oven temperature during the
Convection Roast cycle, press the CONV. ROAST
pad and then press the INCREASE or DECREASE
pad to get the new desired temperature.