49-2000905 Rev. 2
21
Troubleshooting Tips ...
%HIRUH\RXFDOOIRUVHUYLFH
Problem
Possible Cause
What To Do
Unable to get the display to
show “SF”.
Oven control pads were not touched
properly.
The
BROIL HI/LO
and
BAKE
pads must be touched at the same
time and held for 3 seconds.
Control signals after entering
cooking time or start time.
You forgot to enter a bake temperature or
cleaning time.
Touch the
BAKE
pad and desired temperature or the
SELF
CLEAN
pad and desired clean time.
Oven racks are difficult to
slide.
The shiny, silver-colored racks were
cleaned in a self-clean cycle.
Apply a small amount of vegetable oil to a paper towel and wipe
the edges of the oven racks with the paper towel. Do not spray
with Pam
®
or other lubricant sprays.
Steam from the vent.
When using the ovens, it is normal to see
steam coming out of the oven vents. As the
number of racks or amount of food being
cooked increases, the amount of visible
steam will increase.
This is normal.
TROUBLESHOOTING TIPS
Summary of Contents for JM250DTBB
Page 45: ...49 2000905 Rev 2 21 Notas...
