JS645EL/SL
GE
®
30" Slide-In Electric Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 6/17
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
KW RATING
240V 12.1
208V 9.1
BREAKER SIZE
240V 40 Amps
†
208V 40 Amps
†
†
NOTE:
Check local codes
for required breaker size.
RECEPTACLE LOCATIONS:
Locally approved
flexible service cord or conduit must be used because
terminals are not accessible after range installation. See
shaded area in drawing for location of electrical outlet
box. Recommended outlet locations allow range to be
installed directly against rear wall.
NOTE:
This appliance has been approved for 0" spacing
to adjacent surfaces above the cooktop. However, a 6"
minimum spacing to surfaces less than 15" above the
cooktop and adjacent cabinet is recommended to reduce
exposure to steam, grease splatter and heat.
INSTALLATION INFORMATION:
Before installing,
consult installation instructions for current dimensional
data and additional requirements
ADA
COMPLIANT
29 7/8"
48 1/4"
25 7/8"
36"
37 1/4"
Recommended
6"
Min.
From Walls
30"
Min.
30"
Min.
15"
Min.
2-1/2"
Acceptable electrical
outlet area
7-1/2"
25"
30"
2-1/2"
3"
7"
14-1/2"
29 7/8"
48 1/4"
25 7/8"
36"
37 1/4"
Recommended
6"
Min.
From Walls
30"
Min.
30"
Min.
15"
Min.
2-1/2"
Acceptable electrical
outlet area
7-1/2"
25"
30"
2-1/2"
3"
7"
14-1/2"
