Using the surface units.
Throughout this manual, features and appearance may vary from your model.
How to Set
Push the knob in and turn in either
direction to the setting you want.
At both
OFF
and
HI
the control
clicks
into
position. You may hear slight
clicking
sounds
during cooking, indicating the control is
keeping the power level you set.
A
HOT SURFACE
indicator light, on the
cooktop, will glow when any radiant element
is turned on. It will remain on until the
surface is cooled to approximately 150°F.
Hot surface indicator light will:
■
come on when the unit is hot to the touch.
■
stay on even after the unit is turned off.
■
glow until the unit is cooled to approximately 150°F.
The
WARM
setting on the right
REAR
surface
unit keeps already heated food warm until
ready to serve. Do not use to heat cold food.
Be sure you turn the control
knob to OFF when you finish
cooking.
Dual Surface Unit Control Knob
The right front surface unit has 2 cooking sizes to
select from so you can match the size of the unit to
the size of the cookware you are using.
To use the small (6-inch) surface unit, turn
the control knob to the
SMALL
settings.
To use the large (9-inch) surface unit, turn
the control knob to the
LARGE
settings.
6
Consumer Support
Tr
oubleshooting T
ips
Care and Cleaning
Operating Instructions
Safety Instructions