to Set Oven for Cleaning
Quick Reminder:
1. Prepare the oven
2. Close
oven
completely.
3. Press
AUTO SELF CLEAN
4. Press the INCREASE or DECREASE pad
until the desired Clean
Time appears.
oven is too hot and you start to set clean
the word “OFF” will appear in the display.
Allow additional time
you try
to set the
NOTE: Only one oven at
time can be self-cleaned.
1.
the directions to prepare the oven
for cleaning.
❑
2. Press the AUTO SELF CLEAN pad.
AUTO SELF
CLEAN
3. Press the INCREASE or DECREASE
pad until the desired Clean Time
is displayed.
Clean Time is normally hours. You
can change the Clean Time to anytime
between 2 and 4 hours, depending on
the amount
soil
in
your oven.
The self-clean cycle will automatically begin after
“CLEAN” is displayed and the time
the clean
cycle is set. The words “ON” and “LOCK” will
appear in the display when the door automatically
locks. It
not be possible to open the oven door
until the temperature drops below the lock
and
LOCK light goes off.
4. When the LOCK light is off, open the door.
NOTE:
The word “door” will be displayed, the word
“LOCK”
flash and oven control will
if you set the clean cycle and forget to close the
oven door.
●
A
may automatically turn on and off to cool
internal parts. This is normal and the fan may
continue to run even after the oven is turned off.
You can find out when the clean cycle
will be finished by pressing the STOP
TIME button.
To Stop a Clean Cycle
o
1.
Press the
pad.
2. Wait
the oven has cooled below locking
CLEAR
temperature. You will not be able to open the
door right away unless the oven is below the
OFF
locking temperature.
31