4
Installation Instructions
INSTALL MICROWAVE OVEN
INTO CABINET
5
.
Slide the microwave oven part way into the cabinet
opening.
Plug in the microwave oven.
Bottom bracket must be flat to the cutout floor to
engage correctly with the anti-tip bracket as shown.
Carefully slide the microwave back, making sure
the power cord is not mashed or cut.
Center
the microwave oven within the cutout
opening and slide the microwave oven in place,
engaging the anti-tip bracket.
Ensure the microwave oven is
accurately centered
.
Drill pilot holes through the positioning flange
and then install three
1
⁄
2
″
screws at the front of the
bottom duct as shown.
A
B
C
Place the trim frame over the microwave oven.
Make sure the trim frame is level and the
microwave oven is centered within the trim frame.
Mark four center positions through the four
mounting holes of the trim frame.
NOTE:
Center the trim frame equally on all four sides.
Remove the trim frame and drill four pilot holes.
Attach the trim frame by using four screws.
A
B
C
D
Anti-Tip Assembly
Bottom Duct
1
⁄
2
″
Screw
Bottom Bracket
Anti-Tip
Bracket
D
E
Cutout Opening
Positioning Flange
1
⁄
2
″
Screw
F
INSTALLING THE TRIM FRAME
6
.
Pilot Hole
Cutout Opening
Mounting Hole
Trim Frame
1
″
Screw
Your trim kit is now fully installed. Replace any
loose items that were removed from the inside of
the microwave oven.
Keep these installation instructions for future
reference.
Replace house fuse or close circuit breaker.
A
B
REPLACE ANY LOOSE ITEMS
7
.
Part No. 245B1790P075
Pub. No. 31-20936-1
3828W5U0053
12-00 JR
Printed in Korea
C
