GE MDS entraNET 900 Technical Manual Download

Page: 9 / 220

05-4055A01, Rev. E

MDS entraNET Technical Manual

vii

OPERATIONAL & SAFETY NOTICES

RF Exposure

U.S. Installations:

Professional installation required. The radio equipment

described in this guide emits radio frequency energy. Although the power level is
low, the concentrated energy from a directional antenna may pose a health hazard.
For 900 MHz units, do not allow people to come closer than 23 cm (9 inches) to
the antenna. For 2.4 GHz units, do not allow people to come closer than 5 cm (2
inches) to the antenna. These distances apply whether the transmitter is operated
in indoor or outdoor environments. More information on RF exposure is available
on the Internet at

www.fcc.gov/oet/info/documents/bulletins

ETSI Installations:

In regions where the European Telecommunications Stan-

dards Institute (ETSI) standards apply, 2.4 GHz units with a maximum output
power of 100 mW EIRP are supplied. Do not allow people to come closer than 2.2
cm (1 inch) to the antenna.

CSA/US Notice



The transceiver has been recognized for use in hazardous locations by the Canadian Standards Association
(CSA), which also issues the U.S. mark of approval. The CSA Certification is in accordance with CSA STD
C22.2 No. 213-M1987.

FCC Part 15 Notice

The transceiver complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including inter-
ference that may cause undesired operation. This device is specifically designed to be used under Section 15.247 of
the FCC Rules and Regulations. Any unauthorized modification or changes to this device without the express approval
of GE MDS may void the user’s authority to operate this device. Furthermore, this device is intended to be used only
when installed in accordance with the instructions outlined in this manual. Failure to comply with these instructions
may also void the user’s authority to operate this device.

Manual Revision and Accuracy

While every reasonable effort has been made to ensure the accuracy of this manual, product improvements may result
in minor differences between the manual and the product shipped to you. If you have additional questions or need an
exact specification for a product, please contact our Customer Service Team using the information at the back of this
guide. In addition, manual updates can often be found on the GE MDS Web site at

www.gemds.com

Environmental Information

The manufacture of this equipment has required the extraction and use of natural resources. Improper disposal may
contaminate the environment and present a health risk due to hazardous substances contained within. To avoid dissem-
ination of these substances into our environment, and to limit the demand on natural resources, we encourage you to
use the appropriate recycling systems for disposal. These systems will reuse or recycle most of the materials found in
this equipment in a sound way. Please contact GE MDS or your supplier for more information on the proper disposal
of this equipment.

Battery Disposal

–This product may contain a battery. Batteries must be disposed of properly, and may not be disposed

of as unsorted municipal waste in the European Union. See the product documentation for specific battery information.
Batteries are marked with a symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling return the battery to your supplier or to a designated collection point. For more information see:

www.weeerohsinfo.com