![background image](http://html.mh-extra.com/html/ge/mds-mercury-series/mds-mercury-series_reference-manual_132804048.webp)
40
Mercury Reference Manual
05-4446A01, Rev. C
NOTE:
In the menu descriptions that follow, parameter options/range,
and any default values are displayed at the end of the text
between square brackets. Note that the default setting is
always shown after a semicolon:
[
available settings or range;
default setting
]
3.3
BASIC OVERVIEW OF OPERATION
3.3.1 Starting Information Screen
Once you have logged into the Management System, the Starting Infor-
mation Screen (
Figure 3-9
) appears with an overview of the transceiver
and its current operating conditions.
Figure 3-9. Starting Information Screen
(AP screen shown; Remote similar, differences noted below)
•
Device Mode
—Operating mode of the unit as it relates to the radio
network.
•
Device Name
—This is a user-defined parameter that appears in
the heading of all pages. (To change it, see
Network Configura-
tion Menu on Page 43
.)
•
Current IP Address
—Unit’s IP address [
169.254.0.2
]
•
Device Status
—Condition of the unit’s operation as follows:
At Access Point:
•
Operational
—Unit operating normally.
•
Initializing
—This is the first phase after boot-up.
•
Synchronizing
—Unit is waiting for the GPS receiver to obtain
a satellite fix and for its internal clock to synchronize to the
GPS timing signals.
Summary of Contents for MDS Mercury Series
