Menu Text
Col
Row
Default Setting
Available Options
Description
This setting determines the elements that will reset the CB fail timer for CB Failures, which were initiated by the voltage protection function.
Ext Prot Reset
45
07
CB Open & I<
0=I< Only
1=CB Open & I<
2=Prot Reset & I<
This setting determines the elements that will reset the CB fail timer for CB Failures initiated by external protection functions.
UNDER CURRENT
45
08
The settings under this sub-heading relate to Undercurrent settings
I< Current Set
45
09
0.1
From 0.02*I1 to 3.2*I1 step 0.01*I1
This setting determines the current threshold, which will reset the CB Fail timer for Overcurrent-based protection
IN< Current Set
45
0A
0.1
From 0.02*I2 to 3.2*I2 step 0.01*I2
This setting determines the current threshold, which will reset the CB Fail timer for Earth Fault-based protection
ISEF< Current
45
0B
0.02
From 0.001*I3 to 0.8*I3 step 0.0005*I3
This setting determines the current threshold, which will reset the CB Fail timer for SEF-based protection
BLOCKED O/C
45
0C
The settings under this sub-heading relate to Blocked Overcurrent settings
Remove I> Start
45
0D
Disabled
0 = Disabled or 1 = Enabled
This setting enables or disables the Remove I>Start signal
Remove IN> Start
45
0E
Disabled
0 = Disabled or 1 = Enabled
This setting enables or disables the Remove IN>Start signal
4.4
CB FAIL DDB SIGNALS
Ordinal
English Text
Source
Type
Response Function
Description
150
CB Fail Alarm
Software
PSL Input
Alarm latched event
This DDB signal is an alarm indicating CB Failure
227
Ext. Trip 3ph
Programmable Scheme Logic
PSL Output
No response
This DDB signal receives an external three-phase trip signal
353
Bfail1 Trip 3ph
Software
PSL Input
Protection event
This DDB signal is the three-phase trip signal for the stage 1 CB Fail function
354
Bfail2 Trip 3ph
Software
PSL Input
Protection event
This DDB signal is the three-phase trip signal for the stage 2 CB Fail function
373
IA< Start
Software
PSL Input
No response
This DDB signal is the A-phase Phase Undercurrent start signal
374
IB< Start
Software
PSL Input
No response
This DDB signal is the B-phase Phase Undercurrent start signal
375
IC< Start
Software
PSL Input
No response
This DDB signal is the C-phase Phase Undercurrent start signal
376
IN< Start
Software
PSL Input
No response
This DDB signal is the Earth Fault undercurrent start signal
377
ISEF< Start
Software
PSL Input
No response
This DDB signal is the Sensitive Earth Fault undercurrent start signal
380
All Poles Dead
Software
PSL Input
No response
Chapter 5 - Protection Functions
MiCOM P747
114
P747-TM-EN-1
P747-TM-EN-1.1
Summary of Contents for MiCOM P747 Agile
