18
Oven Racks
Professional Dual Fuel Range
To remove a rack:
1.
Make sure the rack is pushed all the way into
the oven.
2.
Grasp the rack by both its upper front rail and
its lower front rail and lift straight up to unlock
the front rack locks from the rack supports.
3.
Firmly holding onto both the upper and lower
front rack rails, pull the rack forward and
remove it from the oven.
To replace a rack:
1.
Place the rear rack locks over and onto
the rack supports (five rack positions are
available including the top position).
2.
Slide the rack all the way in until the
rear rack locks are secure on the rear rack
supports and press the front rack locks onto
the front rack supports.
3.
Pull the rack all the way out to check that it is
properly engaged.
Full
extension
oven racks
Slide the rack all the way in
and push down to lock the
front rack locks onto the
front rack supports
Lift to unlock front
rack locks from
the rack support
Upper
front rail
Lower
front rail
Upper
front rail
Lower
front rail
Front rack lock
Front rack
lock
CAUTION:
To avoid possible
burns,
place the racks in the correct position
before turning on the oven.
The correct rack position depends on the
kind of food and the browning desired.
The racks have a frame that locks into the
rack supports on both sides. Once the frame is
locked into place, always pull the rack out, by its
upper front rail, to its full extension stop position,
when placing or removing cookware.
Remove
and
replace
oven racks
